5 Simple Techniques For harley davidson sportster shock absorbers


Setting up your new shocks is nearly a fairly easy of the activity as they ended up taking the aged ones off; even so, There may be one worry. Your alternative shocks might or might not have spacers, and No matter, you want to ensure They're the correct sized spacers.

Which is a matter with the supplier. He could possibly buy it, but I would not be optimistic. My experience with Harley components is the fact that once the component goes the whole point is absent.

1st, add two or 3 lbs . of air for the shocks to apparent the lines of any shock oil that will have traveled up them.

They use pressurized nitrogen to avoid foaming, but a number of the nitrogen gets into the oil and kinds an emulsion. This also decreases the dampening beneath tough use. To stop this, far better shocks Possess a piston that floats around the oil to separate the nitrogen. Top-of-the-line shocks Have got a remote oil reservoir that retains shock effectiveness regular beneath tough use.

YSS are already production bike shock absorbers for more than thirty yrs and they are on the list of world’s premier aftermarket shock absorber suppliers.

These have a much better development plus more attributes compared to 412. A lot of entrepreneurs would consider them the minimal they'd use on a motorbike.

Shock absorbers, or dampers are Element of your vehicle's suspension system, plus the automobile can not work securely without them. Shock absorbers can be found in a variety of

The bike's shocks read more attach to your swingarm and provide help to your rear of the bike. In advance of beginning with removing from the shocks, assist the bicycle with a motorcycle frame jack or very similar.

Determine four. Freeing base of shock from swingarm. Immediately after the bottom on the shock is free, take away the best shock bolt and set the outdated shock absorber aside. Repeat procedure for one other shock.

Since Harley shocks are nearly vertical you may just measure and generate down the space from a single shock mounting bolt to the other. This is certainly your unloaded dimension; the shocks are entirely extended.

Other shock changes. Hydraulic dampening changes are doable with quite a few shocks, plus the abilities and treatments change concerning distinctive shocks. Here is where by looking through the Guidance that arrived with the shocks will be required.

Set up one other shock in a similar way, remembering to wash and put a fall of blue Loctite on Each and every mounting bolt.

Cost-free conventional shipping applies to purchases totaling $fifty or even more following promotions and discount rates are used.

The compressor and shock use A fast disconnect fitting. Simply drive the airline in the fitting to attach. Pull within the airline to examine the relationship. Now transfer the shock horizontally and put in the front shock bolts. The shock producer might want you to use anti-seize on these bolts. Ensure the washers are positioned on to the bolts and tighten any remaining loose bolts.

Leave a Reply

Your email address will not be published. Required fields are marked *